Adage is an exclusive& authorized partner for M/s.Union Instruments GmbH in India. The Union make CV analysers are used to measure the calorific value for most of the gases in the industry. The analysers can be used in most of the applications which include Iron and steel , Bio gas , Oil & Gas , chemical industries, power plants, custody transfer measurementand many more. The analyser models are also available with ATEX certification suitable for Zone 1 & Zone 2 area classifications.
The CWD2005 device series (Calorimetry, Wobbe-Index und Specific Density) comprises versions of combustion calorimeters for direct and continuous determination of gas quality from the following measurands and operands:
Heating and combustion values
Combustion Air Requirement (CARI) and air requirement, with integrated gas analysis
Energy quantity, with expanded system EMS2005.
The Wobbe index and specific density are measured, and the heating value and combustion value are calculated from these measurements.When components for gas analysis are added to the CWD2005, the air requirement, or CARI, can also be determined from the analyzed gas composition.The operating principle of the CWD enables all combustible gas components to be detected, which allows it to be used even for gases with rapidly changing gas composition
The CWD2005 BASIC is the standard combustion calorimeter for online determination of the Wobbe Index and specific density. The Wobbe Index and the specific density are measured directly, calorific value and CARI are calculated from these values.
It is suitable for all combustible gases - even low calorific gases can be measured with a support gas supply. Additionally, the CWD provides optionally a measuring range switch to measure huge measuring ranges. Further, due to the very robust measuring system it is possible to measure heavily contaminated gases such as coke gas and blast furnace gas without significant increased maintenance requirements.
CWD3000 Exp calorimeter, is far superior to other systems due to its flexibility, accuracy and reliability.
High performing combustion calorimeter allows fast and easy measurement of Wobbe Index (WI).
Calorific Values (CV), and Specific Gravity (SG) in hazardous areas according to: ATEX (II 2G Exp IIC T4 Gb) and IECEx (Ex pxb IIC T4 Gb).In chemical plants, combustible gases (waste gases) are released and combusted in flares. The quality of these gases varies widely. To ensure correct and continuous flaring, the waste gas must contain a minimum amount of combustible gases. In this case, Natural Gas is added and the gas mix is controlled by the CWD. Chemical industry processes produce process gases that, depending on their composition and possible further application, are disposed of as waste gas or further used as an energy source or raw material. This is a typical application in industrial parks. In all cases, the calorific analysis of the gas with the CWD is very helpful. Gas turbines are very common energy generators which react very sensitively to changing operational conditions. Therefore, it is important to know the composition of the combustion gas (typically Natural Gas) exactly at any time. The CWD calorimeter is very helpful for this application.